eSun Matte PLA 3D Print Filament 1.75mm 1kg - Deep Black
The eSUN 1.75mm ePLA-Matte 3D Printer Filament, PLA-Matte has a matte surface effect with no obvious layer lines. It has a lower density and saves 21% filament on the same printing project as other PLA filaments. It's tougher and not as easy to break compared to standard PLA. The support structure is easy to peel off and the printed surface is not scratched.
Key Features
- Environmental friendly
- Cost-effective
- High-speed printing
- Easy to peel off the support
- Excellent printability
- Hard to break
- Matte surface effect
- Low density
Printer Settings
- Extruder Temperature(℃) 200 - 230℃
- Bed temperature(℃) 45 - 60°C
- Fan Speed 100%
- Printing Speed 40 - 100mm/s
eSun Matte PLA 3D Print Filament 1.75mm 1kg - Deep Black
The eSUN 1.75mm ePLA-Matte 3D Printer Filament, PLA-Matte has a matte surface effect with no obvious layer lines. It has a lower density and saves 21% filament on the same printing project as other PLA filaments. It's tougher and not as easy to break compared to standard PLA. The support structure is easy to peel off and the printed surface is not scratched.
Key Features
- Environmental friendly
- Cost-effective
- High-speed printing
- Easy to peel off the support
- Excellent printability
- Hard to break
- Matte surface effect
- Low density
Printer Settings
- Extruder Temperature(℃) 200 - 230℃
- Bed temperature(℃) 45 - 60°C
- Fan Speed 100%
- Printing Speed 40 - 100mm/s
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The eSUN 1.75mm ePLA-Matte 3D Printer Filament, PLA-Matte has a matte surface effect with no obvious layer lines. It has a lower density and saves 21% filament on the same printing project as other PLA filaments. It's tougher and not as easy to break compared to standard PLA. The support structure is easy to peel off and the printed surface is not scratched.
Key Features
- Environmental friendly
- Cost-effective
- High-speed printing
- Easy to peel off the support
- Excellent printability
- Hard to break
- Matte surface effect
- Low density
Printer Settings
- Extruder Temperature(℃) 200 - 230℃
- Bed temperature(℃) 45 - 60°C
- Fan Speed 100%
- Printing Speed 40 - 100mm/s
